Emerald Cut Diamond Stud Earrings: Cut, Size and Fit

Emerald cut diamond stud earrings, radiant cut diamond studs and Lena Cohen’s exclusive Atelier Cut offer three different interpretations of an elongated rectangular diamond. All three can be commissioned as matched natural diamond earrings through Lena Cohen Jewellery’s London workshop, with the diamonds, proportions, gold or platinum setting and fastening selected around the wearer.

Emerald cut diamond stud earrings

The choice is not simply between different shapes. A classic emerald cut produces broad, mirror-like reflections. A radiant cut introduces more fragmented brilliance and fire. The Lena Cohen Atelier Cut was developed for clients who love architectural diamond geometry but want a distinctive combination of mirror-step depth and lively brilliant faceting.

This guide explains how the cuts compare, what makes a well-matched pair, how to choose the right diamond dimensions and why the setting, screw backs and post length matter when commissioning fine diamond studs.

Emerald-inspired natural diamond stud earrings with refined rectangular geometry

The short answer

Choose classic emerald cut studs for the traditional hall-of-mirrors effect, radiant cut studs for a brighter, more scintillating rectangular diamond, or Lena Cohen Atelier Cut studs for an exclusive house-cut design combining elongated geometry, mirror-step reflections and more complex brilliant faceting.

Lena Cohen Jewellery can create matched natural diamond stud earrings in each of these styles, made to order in London in solid 18k gold or platinum.

Classic Emerald Cut Diamond Stud Earrings

The classic emerald cut is defined by its rectangular outline, clipped corners, broad table and long parallel step facets. Its distinctive appeal comes from orderly, mirror-like reflections rather than the numerous small flashes of a round brilliant diamond.

This makes emerald cut diamond studs particularly appealing to clients who value clean geometry, symmetry and the quieter visual presence of a traditional step-cut diamond.

The proportions can change the impression considerably. A wider emerald cut feels balanced and architectural, while a more elongated stone creates a slender vertical line on the ear.

When commissioning a pair, both diamonds should be considered together. Their length-to-width ratios, corner shapes, visible dimensions and patterns of reflection need to look harmonious.

Classic emerald cut natural diamond stud earrings with rectangular step-cut facets

Best for: someone who prefers the recognisable sophistication of an emerald cut, clear lines and broad reflections rather than maximum scintillation.

Radiant Cut Diamond Stud Earrings

Radiant cut diamonds can share the rectangular silhouette and cropped corners associated with emerald cuts, but their facet arrangement is fundamentally different.

Where an emerald cut creates long, organised reflections, a radiant cut uses brilliant-style faceting to produce more fragmented flashes, brilliance and fire. Its appearance is more animated, particularly as the earrings move.

Elongated radiant cuts are especially interesting for diamond studs because they maintain a defined rectangular outline while offering a lively pattern of light.

Not every radiant diamond has the same appearance. The ratio, depth, facet pattern and quality of light return can differ significantly between individual stones. Two diamonds with similar certificates may not make a visually convincing pair.

Lena Cohen Jewellery can commission radiant cut natural diamond studs with matched proportions and carefully selected diamonds, using settings and fastenings developed for the chosen stones.

Best for: someone who loves rectangular diamonds but prefers greater sparkle and movement than a conventional step cut typically provides.

Radiant Cut Diamond Stud Earrings Lena Cohen Jewellery

Lena Cohen Jewellery · House Cut

The Lena Cohen Atelier Cut Diamond Studs

 

The Atelier Cut is Lena Cohen Jewellery’s distinctive elongated rectangular diamond cut, developed for clients drawn to the architecture of an emerald cut but looking for a more individual light performance.

Its defining features are straight sides, softly rounded faceted corners, balanced elongated proportions and a combination of long mirror-step reflections with more complex brilliant faceting.

The design brings together the glass-like depth associated with architectural step cuts and the crisp flashes, fire and scintillation created by its additional brilliant facets.

Lena Cohen Atelier Cut natural diamond stud earrings with elongated geometry and mirror-step brilliance

Why the Atelier Cut is different

The Atelier Cut is not a standard emerald cut and should not be confused with a conventional radiant cut. It has its own combination of proportions, corner treatment and facet architecture.

The original design was developed for a private client who wanted an elongated rectangular diamond with the restrained structure of an emerald cut, but with greater fire and scintillation.

That commission became the basis of Lena Cohen’s Atelier Cut: a recognisable house design which can now be created as a new matched pair of natural diamond studs.


Explore the Lena Cohen Atelier Cut Diamond Stud Earrings

Other Architectural Diamond Cuts for Bespoke Stud Earrings

Emerald, radiant and Atelier Cut are the three principal directions considered here, but clients looking for geometric diamond studs are not limited to these designs.

Depending on the required size, proportions and availability of suitable natural diamonds, Lena Cohen Jewellery can also discuss related cuts for individually commissioned earrings.

Baguette Cut

Baguette diamonds have a long, narrow outline with relatively simple step faceting. They can create beautifully understated vertical studs, particularly for clients drawn to Art Deco geometry. Their slender proportions distinguish them from the broader appearance of most emerald cuts.

Asscher Cut

The Asscher cut is related to the emerald cut through its step-facet structure, but its classic outline is predominantly square. It gives a different kind of architectural presence on the ear, with a more compact shape and characteristic concentric reflections.

Elongated Cushion Variations

Elongated cushion diamonds introduce softer corners and a less strictly rectangular outline. Brilliant-faceted and hybrid variations can offer different patterns of reflection, providing another possibility for clients who want something between crisp geometry and a softer silhouette.

Comparison of emerald, cushion-step, baguette and radiant diamond shapes

The purpose of considering these related cuts is not to find a universally superior shape. It is to identify the outline and light performance that best suit the wearer before selecting the diamonds for a matched pair.

Emerald vs Radiant vs Atelier Cut: Which Works Best for Studs?

Emerald Cut

Traditional rectangular step cut, clipped corners, broad reflective facets and composed, mirror-like flashes.

Choose for: classic architectural restraint.

Radiant Cut

Rectangular or square outline with brilliant-style faceting and lively, fragmented reflections.

Choose for: strong sparkle within a geometric silhouette.

Atelier Cut

Exclusive elongated rectangular house cut with softly faceted corners, mirror-step depth and complex brilliant facets.

Choose for: a distinctive balance of structure and animated light.

With all three options, the exact diamonds should be assessed individually. A cut name alone does not guarantee beautiful proportions, well-balanced reflections or a convincing match.

How Do Rectangular Diamond Studs Compare with Round Brilliant Studs?

Round brilliant diamonds are designed around a highly developed pattern of brilliance and scintillation. Their familiar outline creates an even circular appearance on the ear.

Rectangular cuts offer a different visual effect. Their elongated outlines introduce a vertical line, while variations in facet design can create anything from calm step-cut reflections to highly animated brilliant flashes.

For some buyers, this makes a rectangular diamond more distinctive than a classic round stud without requiring a more elaborate earring setting.

Visual comparison of rectangular emerald cut and classic round brilliant diamond stud earrings

What Makes a Beautifully Matched Pair of Diamond Studs?

With fine diamond studs, the two stones must work together. This is particularly important for elongated and architectural cuts, where slight differences in outline and facet pattern can be visible when the earrings are placed side by side.

Visible size and proportions

Carat measures weight rather than visible size. Two natural diamonds of similar carat weight may have noticeably different face-up dimensions if their depth and proportions differ.

For rectangular earrings, compare the actual millimetre measurements, length-to-width ratios and corner treatment rather than relying on total carat weight alone.

Colour and clarity

Colour should appear harmonious across the pair. Clarity also deserves close attention, especially with traditional emerald cuts, where broad, open facets may make inclusions easier to see.

A laboratory clarity grade is useful, but it does not describe every aspect of the stone’s visual character. Inclusion position, nature, relief and visibility can influence the appearance of the finished earrings.

Light performance

The two diamonds should have compatible patterns of reflection. For emerald cuts, look at the balance of long step reflections and visual depth. For radiant cuts, consider brilliance and the distribution of bright and dark areas. For Atelier Cut studs, the relationship between mirror-step reflections and brilliant faceting is a defining part of the design.

Independent diamond documentation

For significant natural diamond commissions, appropriate laboratory documentation helps establish the characteristics of the selected stones. Lena Cohen Jewellery discusses diamond specifications and relevant GIA certification before production.

The final selection is a combination of documented characteristics and visual assessment of the two stones as a pair.

Large natural diamond stud earrings on ear, Lena Cohen Jewellery London.

How Large Should Emerald or Radiant Cut Diamond Studs Be?

The ideal size depends on the recipient’s ear, preferred jewellery scale and whether the earrings are intended as everyday fine jewellery or a more substantial statement pair.

Always check whether carat weight is stated per earring or as the combined total for the pair. A pair described as 2.00ct total normally means approximately 1.00ct per earring, assuming the stones are evenly matched.

For elongated diamonds, millimetre dimensions are particularly useful because the same weight can produce different visual impressions.

Smaller architectural studs

Smaller matched diamonds can offer a refined rectangular outline without dominating the ear. At this scale, proportions and the neatness of the setting remain important.

Around one carat per earring

Diamonds in this range create a more substantial presence, allowing the cut geometry to become a noticeable feature. The dimensions, setting height and fastening need to be considered together.

Larger natural diamond studs

For larger matched pairs, the practical design becomes just as important as the diamonds. Weight distribution, support behind the lobe, post positioning and comfortable fastening should be discussed before the settings are made.

Lena Cohen Jewellery can consider different diamond sizes according to the requested cut, available matched stones and the proposed commission.

The Setting Matters: 18K Gold, Platinum, Screw Backs and Post Length

Commissioning diamond studs is not only about selecting the stones. The setting determines how the diamond sits against the ear, while the post and fastening influence everyday comfort and security.

Choosing the metal

Lena Cohen can create natural diamond studs in solid 18k white gold, 18k yellow gold or platinum.

White gold and platinum create a cooler visual frame, while yellow gold adds warmth and contrast. The design of the setting is developed to complement the selected diamond shape rather than overwhelm it.

Flower and pyramid screw backs

Flower screw backs are a signature fastening option for Lena Cohen’s substantial diamond studs. Their threaded construction allows the back to be secured onto the matching post.

Pyramid screw backs can also be discussed for clients who prefer a more geometric finish. Traditional butterfly backs may be suitable for certain designs and preferences.

The appropriate fastening depends on the size and construction of the earrings, the wearer’s needs and the agreed design.

18k solid gold screw back piercing helix studs

Why individual post length matters

A longer post is not automatically more comfortable or secure. If it is unnecessarily long, the earring may have excess movement. If it is too short, the fastening can press against the lobe.

For the Atelier Cut design, the standard post length is 6mm, with adjustments available before manufacture. Bespoke emerald and radiant cut commissions can likewise be developed around the intended wearer.

Where a larger diamond is selected, the support behind the lobe and the balance of the setting should be assessed together. No fastening can guarantee that every earring will sit perfectly on every ear, but individual fitting decisions can significantly improve the result.

Close-up of elongated natural diamond studs in 18k white gold showing the precision of the setting

Lena Cohen elongated Atelier Cut natural diamond stud earring worn on the earlobe

From the London Workshop

A Private Commission: The Original Atelier Cut Diamond Studs

The original Atelier Cut earrings were created for a private client seeking a distinctive elongated rectangular diamond design.

The brief called for straight sides and softly faceted corners, preserving the architectural elegance of emerald-cut diamonds while creating stronger fire and scintillation.

Lena Cohen Jewellery developed and cut a matched pair of natural diamonds specifically for the design.

Original commission specifications

Diamonds: 2.20ct total natural diamond weight

Quality: G colour, VS1 clarity

Dimensions: approximately 7.2 × 4.7mm per diamond

Cut: Lena Cohen Atelier Cut

Metal: solid 18k white gold

Fastenings: flower screw backs with 6mm posts

Making: handcrafted in London, with diamond documentation and UK hallmarking

This original pair illustrates the level of specification that can be considered when creating high-value natural diamond studs. It does not represent a fixed diamond size or setting requirement for future commissions.

Original 2.20ct total natural diamond Atelier Cut stud earrings commissioned from Lena Cohen Jewellery London


View the Atelier Cut earrings and current made-to-order options

Commission Your Own Emerald, Radiant or Atelier Cut Diamond Studs

The Atelier Cut is a distinctive Lena Cohen house design, but it is not the only architectural diamond style available through the workshop.

Clients can also commission classic emerald cut, radiant cut and other suitable geometric natural diamond stud earrings, with the design developed around their preferences.

The process begins with the diamond shape and desired size. The workshop can then discuss suitable matched natural diamonds, colour, clarity, proportions and the preferred metal.

Setting height, fastening style and post length are considered before manufacture so that the finished earrings are planned around the stones and the wearer rather than selected from a generic one-size-fits-all specification.

Two ways to commission

Choose the Atelier Cut: commission an existing Lena Cohen house design, made with a newly selected or prepared matched natural diamond pair and an agreed practical specification.

Choose another diamond cut: discuss a bespoke pair using classic emerald, radiant or another architectural shape, with the proportions and construction developed for the individual commission.

In both cases, the selected diamonds, documentation, final quotation and expected making time are confirmed before production.

Create a Pair of Natural Diamond Studs with Lena Cohen Jewellery

Every matched pair is an opportunity to choose the proportions, light performance and fit that matter most to the wearer.

Lena Cohen Atelier Cut

Explore the existing elongated rectangular house design, created with natural diamonds in 18k gold or platinum.


Explore Atelier Cut Diamond Studs

Classic Emerald, Radiant & Bespoke Cuts

Request a personally developed matched pair of natural diamond studs with your preferred diamond shape, size, quality and fastening.


Discuss Bespoke Diamond Stud Earrings

Further Reading


How to Choose Diamond Stud Earrings

A broader guide to diamond shapes, size, settings and everyday fit.


Diamond Studs for Older Ears

Practical guidance on forward tilting, earlobe support, backs and post length.


Diamond Studs for Lobe and Helix Piercings

Understanding placement, piercing jewellery construction and fit.

Diamond Education & Product Information


GIA — How Diamonds Shape Up


GIA — Understanding Diamond Clarity


UK Government — Hallmarking Guidance


Lena Cohen — Atelier Cut Product Specifications

Frequently Asked Questions

Can Lena Cohen make classic emerald cut diamond studs?

Yes. Classic emerald cut natural diamond studs can be commissioned through Lena Cohen Jewellery, with a matched pair selected around the preferred size, proportions, quality and metal.

Can I order radiant cut diamond stud earrings?

Yes. Radiant cut natural diamond studs can be made to order. The workshop can discuss the desired length-to-width ratio, matched diamonds, setting and fastening before providing a quotation.

Is the Atelier Cut an emerald cut or a radiant cut?

Neither. The Lena Cohen Atelier Cut is a distinctive house cut combining an elongated rectangular silhouette, softly faceted corners, mirror-step reflections and complex brilliant faceting.

Which cut has more sparkle, emerald or radiant?

Radiant cuts generally produce more numerous brilliant-style flashes, while traditional emerald cuts are recognised for broader, more orderly step-cut reflections. Actual performance depends on each diamond’s proportions and faceting.

Can I choose the diamond size and quality?

Yes. Bespoke commissions are discussed around preferred diamond size, colour, clarity, visible dimensions and budget. Suitable natural diamond options and documentation are confirmed before production.

Can diamond studs be made with screw backs?

Yes. Flower and pyramid screw-back options can be discussed, along with suitable post lengths and other fastening designs according to the size and construction of the commissioned earrings.

Are the diamonds natural?

Lena Cohen’s Atelier Cut earrings are made with natural diamonds. Classic emerald, radiant and related bespoke diamond stud commissions can also be developed using matched natural stones.

How do I receive a quotation?

Start with your preferred diamond cut, approximate size, metal and any fastening requirements. The London workshop can discuss the available diamond options and provide an individual quotation before production begins.

Whether you prefer the composed reflections of a classic emerald cut, the brilliance of a radiant cut or the distinctive architecture of Lena Cohen’s Atelier Cut, the most successful diamond studs begin with a carefully matched pair and a setting considered for the wearer.

Explore the existing Atelier Cut design or contact the London workshop to discuss a bespoke pair of natural diamond stud earrings.


Enquire About Bespoke Natural Diamond Studs

Shopping Basket
Scroll to Top